|
Compatible with all load cells and other strain gage based transducers
Replaces all conventional weighing indicators
Options ( available soon)
- multiple channel input
- ethernet
- internet
Massload Technologies
301-47th Street East
Saskatoon, SK
Canada
S7K 5H2
Phone: 306-242-2020
Fax: 306-931-1991
Toll Free (US & Can):
1-800-667-3825
|
Computer Weigh Scale
ScaleComp

Instantly transformed your computer into a high
resolution low cost digital scale.
Simply connect our LCIB Interface to any load cell or scale and plug
it into your USB port of your computer.
It's just that simple

Used
Exclusively with Massloads Weigh in Motion Systems!

Facts you should know
- Samples sensor at 2,000
times a second - great for dynamic weighing
- .01% resolution or better
when used for static weighing applications
- Unlimited linearity adjustment
(multi-point calibrations)
- No external power supply
needed (device powers up to 12 loadcells)
- Can be custom designed to
meet your need
- Fully rated USB 1.1 computer
interface allows you to high speed weighing software on any computer!
Forget the full sized desktop.
- 16 bit resolution
- Connect up to 8 devices
to one computer, monitor 8 scales on a single PC
- Can power twelve 300 ohm
load cells
- Backwards compatible with
LCIC card
- Small, standalone package,
easy to wire to any scale
- Calibration is stored on
the device, not the computer, just plug it in and go.
- Easy to use, calibration
utility and library.
- Drivers for Windows 98,
Windows 2000, Windows XP
Home or Professional
Any question
please contact me bill@massload.com
|
|
Typical Applications
Static Weighscales
Multi-scale processing
Realtime data gathering
Computer powered scale
Call Bill
at 1 800 667 3825
or 1 306 242 2020
Fax 1 306 931 1991
Email bill@massload.com
If you have any questions or comments
Please fill out the form below
Testimonial:
Bourgault Industries has recently purchased a LCIB Interface device
supplied by the Saskatoon Massload Office. We are very impressed with
both
the simplicity of the device and the simplicity of the bundled software...
Devin Lung, P.Eng.
Bourgault Industries Ltd.
www.bourgault.com
|





Massload Scale Scope Software
What is it?
ScaleScope is used for capturing
and displaying data from any strain gauge based sensor. This includes
loadcells, pressure transducers, ect. ScaleScope gathers data from either
Massload's LCIB USB interface device. There are several parts to ScaleScope.
- A regular digital indicator
type display that has all the functions of standard weight displays.
- A high speed data capturing
module
- A multi-channel display
for users with more than one scale (supports up to 8 scales)
- A scrolling graph that shows
the output over time of any channel.
ScaleScope has been designed
to offer many of the features that high end digital weight indicators
have. These include a ticket editor that allows the user to make custom
designed tickets, support for a remote display using a standard rs-232
protocol, up to 6 user definable setpoints that allow the sending of rs-232
characters when the setpoints are reached, counting scale module with
an unlimited amount of parts, and many other features.
Features:
- USB plug and play, device
and sensors are powered by the USB bus, no external power required
- Simple USB driver and software
installation
- Simple scale calibration,
multiple calibrations stored on device means you are able to use on
LCIB device for several different sensors. Unlimited calibration points
allowed.
- Can be used with any strain
gauge based sensor
- Export graph data to MS
Excel or text file
- Full data management tools
built in
- Unlimited sampling times,
limited only to the size of your hard drive
- Part Counting, unlimited
part library
- Scoreboard support (rs-232)
- Setpoint support (rs-232)
- Advanced ticket editor for
serial printers
- User configurable multi-channel
screen
- Capture and graph multiple
channels simultaneously (multiplexed, up to 2000 samples/second)
- Save and print static weighing
data
- Flexible sampling rates
from 1 sample per hour to up to 2000 samples per second
Screen Shots
Download the
Latest Version
ScaleScope
Version 2.09 - March/05-
7.1 MB
Not What You
Need?
No problem. Our crew of software
engineers will listen to your requirements and develop an application
for you. Whether it be a small addition or modification, or a full blown
custom application, we would be happy to help you

Want to develop your own
application Based on the LCIB?
Massload will soon be offering
an ActiveX control that will allow you, as a programmer, to develop your
own application. Simply insert the .ocx file into your application, and
you will have full control over the device.
This is a list of the properties,
methods and events that the control is currently capable of:

Control allows hot-swappable
use of LCIB by automatically reconnecting device if it becomes unconnected.
Control comes with sample code
in Visual Basic 6 that shows you how to get up and running fast!
|